Forums  > General  > easy servo drive factory  
     
Page 1 of 1
Display using:  

gdfgjr8


Total Posts: 10
Joined: Apr 2018
 
Posted: 2018-04-26 03:50
Product Introduction:Easy Servo Drive TS808AH
TS808AH Hybrid servo/easy servo drive (closed loop stepper drive ) is based on the latest DSP technology and advanced control algorithm of combing brushless servo and stepper systems. It combines favored features of both open loop stepper and brushless servo drives, solve the fatal problem “loss of steps” of open loop step systems ,improve the stepper motor high speed performance, and motor & drive heating and noise are also significantly improved.
Compared with brushless servo systems, they have much higher starting and low-speed torque, high standstill stiffness, no hunting, no overshooting, almost zero settling time, and no tuning for almost all applications.
Product Features:Easy Servo Drive TS808AH
●Operation voltage:DC power supply input 24—110VDC or 24--80VAC,The recommended power supply is 68VDC,or 70VAC
●The max continuous output current is 8A,peak current is 10A
●Support pulse+direction and pulse+pulse command type
● Adopt advanced magnetic oriented control technology(FOC) and space vector PWM control technology (SVPWM)
●Adopt advanced variable current and variable frequency technology, it can reduce motor and drive heating and vibration.
●The microstep(pulse/revolution) can be set by protuner or DIP switches
● 0—5VDC analog input for speed mode,and support IO speed control function.(customized)
●Support over voltage,undervoltage,overcurrent,overload protections
●The max pulse frequency is 500KHZ,(the default is 200KHZ)
●The voltage of input pulse is 4.5vdc—28vdc, no need connect any resistor
●Support RS232 for protuner by PC(special cable ,please contact ECON technology for this cable)
●Work smoothly, high torque output at medium/high speed; fast response ,and low heating ,low vibration.
Product Applications:Easy Servo Drive TS808AH
It can be used in various kinds of machines,such as laser cutters, laser markers, high precision X-Y tables,labeling machines ,medical equipment,3D printer ,electronic device ,packing ,robot and so on. Its unique features make the TS808AH an ideal solution for applications that require both low noise and high speed performances.
Product Mounting(unit:mm):Easy Servo Drive TS808AH
Product Function description:Easy Servo Drive TS808AH
DIP settings
Pulse/REV Table
Pul/REVSW1SW2SW3SW4
DefaultONONONON
800OFFONONON
1600ONOFFONON
3200OFFOFFONON
6400ONONOFFON
12800OFFONOFFON
25600ONOFFOFFON
51200OFFOFFOFFON
1000ONONONOFF
2000OFFONONOFF
4000ONOFFONOFF
5000OFFOFFONOFF
8000ONONOFFOFF
10000OFFONOFFOFF
20000ONOFFOFFOFF
40000OFFOFFOFFOFF
SW5:Motor DIR,off=CCW,on=CW
SW6: Motor Selection,off=TC86,On=TC60
Mode Selection
MotorSW7SW8
Self-TestONON
LDOFFON
PMONOFF
FOCOFFOFF

Drive feature and selection guide
Drive modelTS808AH
Voltage24~80VAC,24~110VDC
Max current output8A
Vector over-load current10A
weight0.5kg
Matched closed loop stepper motorTC60 series [TC60-20,TC60-30,TC60-40]
TC86 series[TC86-45,TC86-85,TC86-120,TC86-45BK,TC86-85BK]
Control technology32bit DSP vector closed loop control
Pulse FrequencyMax 500KHZ,the default is 200KHZ
ProtectionOver- voltage, under-voltage ,over-current, error tracing and over-error alarm
Signal inputPulse,direction,enable signal differential input, port electric level 4.5VDC—28VDC, no need to connect resistor
Signal outputOC output, the max output current is 100MA, need to connect a pull-up resistor, Max pull-up voltage24VDC
Encoder feedbackAB encoder differential input, single-end can customized
Subdivision Default 1600/rcv, DIP or ProTurner software to set 200~51200
PPRDefault 1000PPR,can customized 250~5000PPR
Using environment-5℃~55℃
Common Customized RequestIO high-low electric input speed control function
Input Signal(C1)
PIN CodeSymbol
1PUL+
2PUL-
3DIR+
4DIR-
5ENA+
6ENA-

Output Signal(C2)
PIN CodeSymbol
1Pend+
2Pend-
3ALM+
4ALM-

Encoder Connection(C3)
PIN CodeSymbol
1EB+
2EB-
3EA+
4EA-
5VCC(+5V)
6GND

Motor Connection(C4-A)
PIN CodeSymbol
1A+
2A-
3B+
4B-

Power Supply (C4-B)
PIN CodeSymbol
124-80VAC
224-80VAC
!Notice
A、The input power supply can not over AC80V
B、The command signal is 5V ,if it is more than 5V ,no need to connect resistor
C、When the Alarm light is on ,please power off and check
a. the power range is 24VAC---80VAC ;
b. the motor wiring and encoder wiring ,check is there any short

Product Packing:Easy Servo Drive TS808AH
Carton Size:17*12*5.5(mm)
Gross Weight:574g
Product Service:Easy Servo Drive TS808AH
ECON provide technical service from start to end,and will offer one year warranty. Any problem,can send e-mail to our technical engineer and sales,or directly chat on our website.
Payment and Delivery:Easy Servo Drive TS808AH
ECON supports T/T,Paypal,Western Union to make payment. We can arrange express,air and sea shipment,we have professional team to deal with logistic.
Recommendations:Easy Servo Drive TS808AH
Easy Servo Motor in 60mm Size
60mm Size Easy Servo Motor
Easy Servo Motor in 86mm Size
86mm Size Easy Servo Motoreasy servo drive factory
website:http://www.hybridservos.com/hybrid-servo-drive-1
Previous Thread :: Next Thread 
Page 1 of 1